SANITARY MANUAL BALL VALVES:
FEATURES:
- All stainless steel and Mica-filled Teflon construction Type 316 product contact parts.
- Two piece totally encapsulating Mica-filled Teflon seals eliminate voids in which product may accumulate.
- Valve port fully nominal diameter.
- Unobstructed product flow.
- Type outlets: *Tri-Clamp connections. **I-line and Sanitary Acme Threads, ASA flanges, 105 or 300 PSIG rating.
- Handle doubles as a wrench to tighten packing nut.
- Easily disassembles in less than thirty seconds.
|
- Meets 3A standards
- Approved by USDA
- Each valve is tested before shipment. The maximum working pressure is 300 PSIG.
- Maximum working temperature is 450F.
- Face-to-face dimension is interchangeable with sanitary plug.
- In-line adjustment to compensate for seal wear.
- Mounting flange is easily welded to any style tank bottom: hemispheric, dished, flat, cone, etc.***
- Flush with bottom of vessel.***
|
| *Registered trademark Ladish Co. **Registered trademark of Cherry Burrell Co. ***Flush type Only. |
|
|
 |
SANITARY MULTI-PORT, IN-LINE FLUID-FLOW BALL VALVES
| |
Fluid Transfer's exclusive multi-port, in-line Fluid-Flow ball valves are precision made of Type 316 stainless steel. They are designed for rigid corrosion-resistant, sanitary applications in the food, cosmetic, pharmaceutical, beverage, and chemical industries. The solid construction of Fluid-Flow valves provides maximum reliability and failure-free performance under the most extreme conditions. Cleanup and maintenance costs are substantially reduced due to the unique, simple design that allows extremely fast breakdown.. by hand.. no special tools required. Fluid-Flow valves can also be used in C.I.P. systems.
Standard full design seals provide the maximum reduction in product entrapment while full flow ports (also standard) eliminate product flow restrictions. Fully encapsulating Mica-filled Teflon seals are standard on the two-way in-line valve. Solid Teflon seals are available as an option. The three-way in-line valve, as a standard, is supplied with solid Teflon seals. Some applications may require Mica-filled Teflon three-way seals. These are offered as an option. Another standard feature on both the two and three-way in-line valves is a polished #4 ID (3A standard). A polished #4 ID/OD is offered as an option. Electropolish is also available. While other ball valves only meet minimum requirements, Fluid Transfer's Fluid-Flow valves are USDA approved and meet 3A standards.
Sizes range from 1 1/2" to 4". The two-way valve has a working pressure to 300 PSIG and a maximum working temperature of 450F. Three-way valves have a working pressure to 150 PSIG and a maximum working temperature of 300F (for increased pressures to 300 PSIG and temperatures to 450F, request Mica-filled seals). In-line Fluid-Flow ball valves are available as standard with *Tri-Clamp. **In-line, or Sanitary Acme thread and other connections are available upon request.
|
SANITARY FLUSH-TYPE, FLUID-FLOW BALL VALVES
| |
Fluid Transfer's flush-type Fluid-Flow ball valves assure an unobstructed full port product flow. Unlike other ball valves, Fluid-Flow ball valves are the choice where there product is viscous or contains particles. The ball revolves within a totally encapsulating Mica-filled Teflon seal, thus meeting the most stringent sanitary standards. Fluid-Flow ball valves are USDA approved and meet 3A standards.
The corrosion-resistant, sanitary design of Fluid-Flow lush bottom ball valves makes them ideal for use in food, cosmetic, pharmaceutical, beverage and chemical industries. Due to the solid construction of Type 316 stainless steel wetted valve parts and Type 316L stainless steel mounting flange, the user of a Fluid-Flow flush bottom ball valve will experience very few, if any, breakdowns thus eliminating shutdown costs due to valve failure. Easily disassembled in less than thirty seconds, no special tools required, Fluid Transfer's Fluid-Flow ball valves work well in C.I.P. systems.
Flush-type Fluid-Flow ball valves range in size from 1 1/2" to 4" and are available in two finishes; polished #4 ID only (3A standard) and optional polished #4 ID/OD/ Electropolish is also available. Maximum working temperature is 450F with a working pressure to 300 PSIG. Fluid Transfer's flush-type Fluid-Flow ball valves are available with standard outlet types. *Tri-Clamp connectors and Sanitary Acme Threads. Other connections are available upon request.
|
In today's competitive marketplace and economic environment, it has become necessary for the process manufacturer to develop innovative process designs in producing their product. Very often, standard, off-the-shelf items do not conveniently fit the needs of these pioneering companies.
Fluid Transfer understands this situation and designs and manufactures special application ball valves that fit into an individual company's process system needs. A staff of eminently qualified design engineers is ready to modify the Lee standard ball valves to your specifications. Each specially designed valve will be manufactured with the same care and precision that Lee craftsmen have exhibited for over 75 years.
|
|
 |
|
